Screw Press Separator - FAN PSS1.2-520 Separator
Dehydration/Dewatering/Desiccation
The NSW EPA has strict requirements for applying organics to land.
For more information please visit the Work Health, Safety & Permitting tab.
For more information please visit the Work Health, Safety & Permitting tab.
Equipment Overview& Equipment Details
Equipment Details
Make, Model & Classification
| Name | Screw Press Separator |
| Model | FAN PSS1.2-520 Separator |
| Classification | Dehydration/Dewatering/Desiccation |
Operations
| Description or Purpose | Dewatering of Thick (20% solids) as well as Thin slurries (down to 0.1%solids) with dryness adjustable between 25% and 55% (depending on application and model). Ideal for waste products such as dairy effluent, piggery waste and composting facilities. |
| Operating Principles | The PSS is fed by pump or gravity from a holding tank. It takes raw wet waste in one end and dry compost material comes out the other. In the slotted screen, the fibrous solids are screened out from the liquid. The fibers build up a layer which also acts as a filter to separate finer particles from the liquid. The auger flights convey this layer to the solids outlet. The screen surface is cleaned and a new filter layer is formed. The dryness of the solid cake can be adjusted. |
| Additional Information | • The FAN PSS1.2-520 Separator is self-cleaning • The Unit has a high capacity and produces dry solids. • The FAN Separator produces solids at moisture that is optimum for composting. • The maintenance of the FAN Separator is minimal and requires no special training. • The most important parts like screen and auger are made of stainless steel. • Increases the efficiency of following waste water treatment systems. • The power consumption of the FAN PSS is very low. Australian Waste Engineering 0497 814 654 |
Photograph
Recyclables Processed & Productivity
Recyclables Processed
Target Recyclables and Productivity Rates
| Recyclable Type | Productivity - Loading Rate (kg per hour) |
Processing Capacity - Treatment (kg per week) |
Storage Capacity (kg per batch) |
Operating Life (machine hrs) |
|
|---|---|---|---|---|---|
|
Food Organics | Up to 15 m3/h | |||
|
|
Other Organics (garden etc.) | Up to 15 m3/h | |||
|
Flexible Plastic | ||||
|
|
Rigid Plastic | ||||
|
|
Mixed Plastics | ||||
|
|
Expanded Polystyrene | ||||
|
|
Glass | ||||
|
|
Paper | ||||
|
|
Cardboard | ||||
|
|
Mixed Paper & Cardboard | ||||
|
|
Timber | ||||
|
|
Other Recyclable | ||||
| If Other | Solids in a liquid stream that require dewatering. | ||||
Productivity
Life Expectancy
| Operating Life - Years | 20yrs |
Level of Automation
| Operating Mode | Continuous |
| Degree of Automation | Fully automated - materials placed into system and process automated |
Labour Requirements
| Number of Operators | 0 |
| Operator Time (per cycle in mins.) |
Consumables Required
| Consumables |
Service Requirements
| Service Freq. (Tonnes) | |
| Service Freq. (Months) | |
| Downtime per Service (hours) |
Periodic Cleaning Requirements
| Periodic Cleaning | Once every six weeks |
Loading & Unloading Equipment
| Manual Handling Loading | Other |
| If Other (specify) | Pump / Hopper / Auger |
| Manual Handling Unloading | None |
Work Health and Safety & Permitting
Work Health and Safety
Training
| Operator Training Requirements | Familiarisation induction - by OEM/supplier |
Personal Protective Equipment
|
|
Head - Hard Hat |
|
|
Eyes - Glasses |
|
|
Breathing - Mask or Respirator |
|
|
Hands - Gloves |
|
|
Feet - Industrial Footwear |
|
|
Visibility - Hi-viz Clothing |
|
|
Other PPE |
Training Material
|
|
Printed |
|
|
Video/DVD |
|
|
Web-based |
|
|
Other |
Fencing & Enclosures
|
|
Fencing |
|
|
Bunding |
|
|
Floor Reinforcing |
|
|
Covers or Shielding |
|
|
Other |
Approvals Related to Use of Output
Important Note on Composting in NSW
In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.
While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.
If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm
Installation Specifications
Installation Specifications
Utilities
|
|
Power | Volts | 4 |
|
|
Water | KPa | l/min |
|
|
Sewer | l/min | |
|
|
Compressed Air | KPa | CuM/min |
|
|
Gas | Kjoule/hr |
Dimensions
| Length | 1960 cm |
| Width | 640 cm |
| Height | 960 cm |
| Footprint | 0 sq.m |
| Weight | 540 kg |
| Lateral clearance | 0 cm |
| Overhead clearance | 0 cm |
Service Offering
|
|
Supply |
|
|
Installation |
|
|
Maintenance |
|
|
Product Uplift |
|
|
Training |
|
|
Other |
In-Feed & Out-Feed Characteristics
In-Feed Characteristics
Acceptable In-feed Characteristics
|
|
Loose |
|
|
Bundled |
|
|
Tied |
|
|
Wet |
|
|
Dry |
|
|
Shredded |
|
|
Lightly Soiled |
|
|
Heavily Soiled |
|
|
Other |
Exclusions
| Excluded Materials | Metal, Rocks, Glass, etc |
Out-Feed Characteristics
Out-feed Product Characteristics - Shape
|
|
Rectangular Prism |
|
|
Cylindrical |
|
|
Other |
Out-feed Product Characteristics - Container
|
|
Bag/Sack |
|
|
Wrapped |
|
|
Bin |
|
|
Other |
Out-feed Dimensions
| Length | cm |
| Width | cm |
| Height | cm |
| Footprint | sq.m |
| Weight | kg |
| SG | specific gravity |
| Density | kg/Cu.m |
| By-product and Wastes |
Amenity and Nuisance Issues
|
|
Noise |
|
|
Odour |
|
|
Vibration |
|
|
Light |
|
|
Heat |
|
|
Other |
Market/Recipients
|
|
Reprocessor |
|
|
End Market |
|
|
Other |
OEM & Supplier Information
OEM & Supplier Information
OEM Company Details
| Company Name | FAN Separator Gmbh |
| Postal Address | |
| State | |
| Country | |
| Postcode | |
| Web Site | |
| Contact Name | |
| Contact Telephone | |
| Contact Email |
Supplier Company Details
| Company Name | Australian Waste Engineering |
| Postal Address | RSD 6600 Mount Gambier |
| State | SA |
| Country | Australia |
| Postcode | 5290 |
| Web Site | www.austwaste.com.au |
| Contact Name | Eddie Fensom |
| Contact Telephone | +61 (0)8 8738 2021 |
| Contact Email | edan-awe@bigpond.com |
