RUNI Screw Compactor - EPS - SK120
Baling
, Compacting/Compressing
, De-packaging
, Dehydration/Dewatering/Desiccation
, Other ()
Equipment Overview& Equipment Details
Equipment Details
Make, Model & Classification
| Name | RUNI Screw Compactor - EPS |
| Model | SK120 |
| Classification | Baling , Compacting/Compressing , De-packaging , Dehydration/Dewatering/Desiccation , Other () |
Operations
| Description or Purpose | Suitable for the compressing, dewatering, de-stuffing and destruction of EPS, All Bottles, Cans, Tins, Plastics - Save costs by letting the air out of your EPS waste and decreasing number of waste hauls - Save space and handling of material in the back room by disposing of the EPS immediately - Minimize the space you use on equipment – The SK120 can be placed under pallet rack |
| Operating Principles | Compacting expanded polystyrene with a density of: 10g/l to 50g/l (0,77 to 0,39 lbs/ft3 ) at a ratio of 50 : 1 for boxes |
| Additional Information | EPS Compacting EPE Compacting EPP Compacting XPS Compacting Insulation PET- Bottles HDPE - Bottles Large Drums PC LDPE Cans/Tins Compacting (Beverage, Paint, Food) Dust and Airlaid |
Photograph
Recyclables Processed & Productivity
Recyclables Processed
Target Recyclables and Productivity Rates
| Recyclable Type | Productivity - Loading Rate (kg per hour) |
Processing Capacity - Treatment (kg per week) |
Storage Capacity (kg per batch) |
Operating Life (machine hrs) |
|
|---|---|---|---|---|---|
|
Food Organics | ||||
|
|
Other Organics (garden etc.) | ||||
|
Flexible Plastic | 150 | |||
|
|
Rigid Plastic | 200 | |||
|
|
Mixed Plastics | 150 | |||
|
|
Expanded Polystyrene | 18 | 3024 | ||
|
|
Glass | ||||
|
|
Paper | 100 | |||
|
|
Cardboard | 100 | |||
|
|
Mixed Paper & Cardboard | 100 | |||
|
|
Timber | ||||
|
|
Other Recyclable | ||||
Productivity
Life Expectancy
| Operating Life - Years | 15 |
Level of Automation
| Operating Mode | Continuous |
| Degree of Automation | Fully automated - materials placed into system and process automated |
Labour Requirements
| Number of Operators | |
| Operator Time (per cycle in mins.) |
Consumables Required
| Consumables | None |
Service Requirements
| Service Freq. (Tonnes) | |
| Service Freq. (Months) | |
| Downtime per Service (hours) |
Periodic Cleaning Requirements
| Periodic Cleaning | General periodic clean based on environmental conditions |
Loading & Unloading Equipment
| Manual Handling Loading | Conveyor |
| Manual Handling Unloading | Hopper |
Work Health and Safety & Permitting
Work Health and Safety
Training
| Operator Training Requirements | OEM supplied material - self-taught |
Personal Protective Equipment
|
|
Head - Hard Hat |
|
|
Eyes - Glasses |
|
|
Breathing - Mask or Respirator |
|
|
Hands - Gloves |
|
|
Feet - Industrial Footwear |
|
|
Visibility - Hi-viz Clothing |
|
|
Other PPE |
Training Material
|
|
Printed |
|
|
Video/DVD |
|
|
Web-based |
|
|
Other |
Fencing & Enclosures
|
|
Fencing |
|
|
Bunding |
|
|
Floor Reinforcing |
|
|
Covers or Shielding |
|
|
Other |
Approvals Related to Use of Output
Important Note on Composting in NSW
In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.
While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.
If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm
Installation Specifications
Installation Specifications
Utilities
|
|
Power | 415 Volts | |
|
|
Water | KPa | l/min |
|
|
Sewer | l/min | |
|
|
Compressed Air | KPa | CuM/min |
|
|
Gas | Kjoule/hr |
Dimensions
| Length | 2950 cm |
| Width | 500 cm |
| Height | 1750 cm |
| Footprint | 0 sq.m |
| Weight | 200 kg |
| Lateral clearance | 0 cm |
| Overhead clearance | 0 cm |
Service Offering
|
|
Supply |
|
|
Installation |
|
|
Maintenance |
|
|
Product Uplift |
|
|
Training |
|
|
Other |
In-Feed & Out-Feed Characteristics
In-Feed Characteristics
Acceptable In-feed Characteristics
|
|
Loose |
|
|
Bundled |
|
|
Tied |
|
|
Wet |
|
|
Dry |
|
|
Shredded |
|
|
Lightly Soiled |
|
|
Heavily Soiled |
|
|
Other |
Exclusions
| Excluded Materials |
Out-Feed Characteristics
Out-feed Product Characteristics - Shape
|
|
Rectangular Prism |
|
|
Cylindrical |
|
|
Other |
| If Other | Loose |
Out-feed Product Characteristics - Container
|
|
Bag/Sack |
|
|
Wrapped |
|
|
Bin |
|
|
Other |
| If Other | Blocks |
Out-feed Dimensions
| Length | 1500 cm |
| Width | 12 cm |
| Height | 12 cm |
| Footprint | sq.m |
| Weight | kg |
| SG | specific gravity |
| Density | 300 kg/Cu.m |
| By-product and Wastes | Liquid waste separated from solids if applicable |
Amenity and Nuisance Issues
|
|
Noise |
|
|
Odour |
|
|
Vibration |
|
|
Light |
|
|
Heat |
|
|
Other |
Market/Recipients
|
|
Reprocessor |
|
|
End Market |
|
|
Other |
OEM & Supplier Information
OEM & Supplier Information
OEM Company Details
| Company Name | Runi |
| Postal Address | |
| State | |
| Country | Denmark |
| Postcode | |
| Web Site | |
| Contact Name | David Picone |
| Contact Telephone | +61387929777 |
| Contact Email | davidp@telfordsmith.com.au |
Supplier Company Details
| Company Name | Telford Smith Engineering |
| Postal Address | 250 Hammond Rd, Dandenong |
| State | VIC |
| Country | Australia |
| Postcode | 3175 |
| Web Site | www.telfordsmith.com.au |
| Contact Name | David Picone |
| Contact Telephone | (03) 8792 9777 |
| Contact Email | davidp@telfordsmith.com.au |
