Equipment Overview& Equipment Details
Equipment Details
Make, Model & Classification
| Name | Orwak |
| Model | 5070-2 |
| Classification | Compacting/Compressing |
Operations
| Description or Purpose | 5070 Multi chamber system allows you to compact two materials (say cardboard and plastic) in the one machine at the same time. Creates a faster throughput of material and quicker bales. Start with a twin chamber and add more chambers as needed for other materials. |
| Operating Principles | Two chambers side by side with an easy to slide press head, top loading operation so no doors to keep opening and closing, single phase, 3 ton press unit will give you bales of cardboard up to 50kg and plastic up to 80kg. Add more chambers any time for greater throughput. |
| Additional Information | 5070 is easily re-sited as required to bring it closer to the point of material generation. Move with a pallet truck or forklift and plug into a standard 10 amp power point. System also available for wet waste into 660ltr Sulo bins and greater weight and sized bales. |
Photograph
Recyclables Processed & Productivity
Recyclables Processed
Target Recyclables and Productivity Rates
| Recyclable Type | Productivity - Loading Rate (kg per hour) |
Processing Capacity - Treatment (kg per week) |
Storage Capacity (kg per batch) |
Operating Life (machine hrs) |
|
|---|---|---|---|---|---|
|
Food Organics | ||||
|
|
Other Organics (garden etc.) | ||||
|
Flexible Plastic | >80kg | 45K+ | ||
|
|
Rigid Plastic | ||||
|
|
Mixed Plastics | >80kg | 45K+ | ||
|
|
Expanded Polystyrene | ||||
|
|
Glass | ||||
|
|
Paper | >50kg | 45K+ | ||
|
|
Cardboard | >50kg | 45K+ | ||
|
|
Mixed Paper & Cardboard | >50kg | 45K+ | ||
|
|
Timber | ||||
|
|
Other Recyclable | ||||
Productivity
Life Expectancy
| Operating Life - Years | 15+ |
Level of Automation
| Operating Mode | Batch |
| Degree of Automation | Semi-automated - operator attendance required for in-feed and operations |
Labour Requirements
| Number of Operators | 1 |
| Operator Time (per cycle in mins.) |
2 |
Consumables Required
| Consumables | Strapping tape |
Service Requirements
| Service Freq. (Tonnes) | |
| Service Freq. (Months) | 24 |
| Downtime per Service (hours) | 1 |
Periodic Cleaning Requirements
| Periodic Cleaning |
Loading & Unloading Equipment
| Manual Handling Loading | Manual |
| Manual Handling Unloading | Manual |
Work Health and Safety & Permitting
Work Health and Safety
Training
| Operator Training Requirements | Familiarisation induction - by OEM/supplier |
Personal Protective Equipment
|
|
Head - Hard Hat |
|
|
Eyes - Glasses |
|
|
Breathing - Mask or Respirator |
|
|
Hands - Gloves |
|
|
Feet - Industrial Footwear |
|
|
Visibility - Hi-viz Clothing |
|
|
Other PPE |
Training Material
|
|
Printed |
|
|
Video/DVD |
|
|
Web-based |
|
|
Other |
Fencing & Enclosures
|
|
Fencing |
|
|
Bunding |
|
|
Floor Reinforcing |
|
|
Covers or Shielding |
|
|
Other |
Approvals Related to Use of Output
Important Note on Composting in NSW
In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.
While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.
If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm
Installation Specifications
Installation Specifications
Utilities
|
|
Power | 240 Volts | 1.1 |
|
|
Water | KPa | l/min |
|
|
Sewer | l/min | |
|
|
Compressed Air | KPa | CuM/min |
|
|
Gas | Kjoule/hr |
Dimensions
| Length | 174 cm |
| Width | 88 cm |
| Height | 216 cm |
| Footprint | 1.53 sq.m |
| Weight | 522 kg |
| Lateral clearance | 40 cm |
| Overhead clearance | 40 cm |
Service Offering
|
|
Supply |
|
|
Installation |
|
|
Maintenance |
|
|
Product Uplift |
|
|
Training |
|
|
Other |
In-Feed & Out-Feed Characteristics
In-Feed Characteristics
Acceptable In-feed Characteristics
|
|
Loose |
|
|
Bundled |
|
|
Tied |
|
|
Wet |
|
|
Dry |
|
|
Shredded |
|
|
Lightly Soiled |
|
|
Heavily Soiled |
|
|
Other |
Exclusions
| Excluded Materials |
Out-Feed Characteristics
Out-feed Product Characteristics - Shape
|
|
Rectangular Prism |
|
|
Cylindrical |
|
|
Other |
Out-feed Product Characteristics - Container
|
|
Bag/Sack |
|
|
Wrapped |
|
|
Bin |
|
|
Other |
Out-feed Dimensions
| Length | 50 cm |
| Width | 50 cm |
| Height | 70 cm |
| Footprint | .25 sq.m |
| Weight | 50 kg |
| SG | specific gravity |
| Density | kg/Cu.m |
| By-product and Wastes |
Amenity and Nuisance Issues
|
|
Noise |
|
|
Odour |
|
|
Vibration |
|
|
Light |
|
|
Heat |
|
|
Other |
Market/Recipients
|
|
Reprocessor |
|
|
End Market |
|
|
Other |
OEM & Supplier Information
OEM & Supplier Information
OEM Company Details
| Company Name | Orwak Compactors |
| Postal Address | 250 Hammond Road, Dandenong |
| State | VIC |
| Country | Australia |
| Postcode | 3175 |
| Web Site | https://www.orwakcompactors.com.au/ |
| Contact Name | David Picone |
| Contact Telephone | 03 8792 9777 |
| Contact Email | DavidP@telfordsmith.com.au |
Supplier Company Details
| Company Name | Orwak Compactors |
| Postal Address | 250 Hammond Road, Dandenong |
| State | VIC |
| Country | Australia |
| Postcode | 3175 |
| Web Site | https://www.orwakcompactors.com.au/ |
| Contact Name | David Picone |
| Contact Telephone | 03 8792 9777 |
| Contact Email | DavidP@telfordsmith.com.au |
