Equipment Overview& Equipment Details
Equipment Details
Make, Model & Classification
| Name | Horizontal Baler |
| Model | TB 050508/5 |
| Classification | Baling |
Operations
| Description or Purpose | The Techgene TB-0505 series of balers are designed to bale shredded paper or plastic film and is ideally suited to paper makers or printers with a low to medium throughput. |
| Operating Principles | With a centrally located feed aperture, this baler may be equipped with a hopper tailored to meet individual requirements and fed by cyclone, conveyor, or manually as required. PLC control and an operator's touch screen are standard. Additional features include a very rigid body structure, twin inserter cylinders and three hydraulic cylinders around the neck to ensure a tightly packed bale is produced each time. |
| Additional Information | The information provided here is for one of the smallest balers in the range. A wide range of automatic balers are available, please contact DKSH Australia for details of a product to meet your requirements. |
Photograph
Recyclables Processed & Productivity
Recyclables Processed
Target Recyclables and Productivity Rates
| Recyclable Type | Productivity - Loading Rate (kg per hour) |
Processing Capacity - Treatment (kg per week) |
Storage Capacity (kg per batch) |
Operating Life (machine hrs) |
|
|---|---|---|---|---|---|
|
Food Organics | - | - | - | - |
|
|
Other Organics (garden etc.) | - | - | - | - |
|
Flexible Plastic | - | - | - | - |
|
|
Rigid Plastic | - | - | - | - |
|
|
Mixed Plastics | 200 | - | - | - |
|
|
Expanded Polystyrene | - | - | - | - |
|
|
Glass | - | - | - | - |
|
|
Paper | 1600 | - | - | - |
|
|
Cardboard | 400 | - | - | - |
|
|
Mixed Paper & Cardboard | - | - | - | - |
|
|
Timber | - | - | - | - |
|
|
Other Recyclable | ||||
Productivity
Life Expectancy
| Operating Life - Years | 15 |
Level of Automation
| Operating Mode | Continuous |
| Degree of Automation | Fully automated - materials placed into system and process automated |
Labour Requirements
| Number of Operators | 1 |
| Operator Time (per cycle in mins.) |
0 |
Consumables Required
| Consumables | Baling wire, hydraulic oil |
Service Requirements
| Service Freq. (Tonnes) | 0 |
| Service Freq. (Months) | 6 |
| Downtime per Service (hours) | 4 |
Periodic Cleaning Requirements
| Periodic Cleaning | Daily inspection to clean and remove foreign material |
Loading & Unloading Equipment
| Manual Handling Loading | Conveyor |
| Manual Handling Unloading | Manual |
Work Health and Safety & Permitting
Work Health and Safety
Training
| Operator Training Requirements | Training course - by OEM/supplier |
Personal Protective Equipment
|
|
Head - Hard Hat |
|
|
Eyes - Glasses |
|
|
Breathing - Mask or Respirator |
|
|
Hands - Gloves |
|
|
Feet - Industrial Footwear |
|
|
Visibility - Hi-viz Clothing |
|
|
Other PPE |
Training Material
|
|
Printed |
|
|
Video/DVD |
|
|
Web-based |
|
|
Other |
Fencing & Enclosures
|
|
Fencing |
|
|
Bunding |
|
|
Floor Reinforcing |
|
|
Covers or Shielding |
|
|
Other |
Approvals Related to Use of Output
Important Note on Composting in NSW
In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.
While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.
If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm
Installation Specifications
Installation Specifications
Utilities
|
|
Power | 415 Volts | 10 kWh |
|
|
Water | KPa | - l/min |
|
|
Sewer | - l/min | |
|
|
Compressed Air | - KPa | - CuM/min |
|
|
Gas | - Kjoule/hr |
Dimensions
| Length | 530 cm |
| Width | 172 cm |
| Height | 330 cm |
| Footprint | 9 sq.m |
| Weight | 4000 kg |
| Lateral clearance | 200 cm |
| Overhead clearance | 0 cm |
Service Offering
|
|
Supply |
|
|
Installation |
|
|
Maintenance |
|
|
Product Uplift |
|
|
Training |
|
|
Other |
In-Feed & Out-Feed Characteristics
In-Feed Characteristics
Acceptable In-feed Characteristics
|
|
Loose |
|
|
Bundled |
|
|
Tied |
|
|
Wet |
|
|
Dry |
|
|
Shredded |
|
|
Lightly Soiled |
|
|
Heavily Soiled |
|
|
Other |
| If Other | 0 |
Exclusions
| Excluded Materials | Large cardboard, metals |
Out-Feed Characteristics
Out-feed Product Characteristics - Shape
|
|
Rectangular Prism |
|
|
Cylindrical |
|
|
Other |
Out-feed Product Characteristics - Container
|
|
Bag/Sack |
|
|
Wrapped |
|
|
Bin |
|
|
Other |
Out-feed Dimensions
| Length | 100 cm |
| Width | 55 cm |
| Height | 55 cm |
| Footprint | 1 sq.m |
| Weight | 200 kg |
| SG | - specific gravity |
| Density | - kg/Cu.m |
| By-product and Wastes | NIL |
Amenity and Nuisance Issues
|
|
Noise |
|
|
Odour |
|
|
Vibration |
|
|
Light |
|
|
Heat |
|
|
Other |
Market/Recipients
|
|
Reprocessor |
|
|
End Market |
|
|
Other |
OEM & Supplier Information
OEM & Supplier Information
OEM Company Details
| Company Name | Techgene Machinery Co. Ltd. |
| Postal Address | |
| State | |
| Country | Taiwan |
| Postcode | |
| Web Site | www.techgene.com.tw |
| Contact Name | |
| Contact Telephone | |
| Contact Email |
Supplier Company Details
| Company Name | DKSH Australia Pty Ltd |
| Postal Address | 14-17 Dansu Court, Hallam |
| State | VIC |
| Country | Australia |
| Postcode | 3803 |
| Web Site | www.dksh.com.au/ets |
| Contact Name | Jeff Goodwin |
| Contact Telephone | 1300 133 063 |
| Contact Email | jeff.goodwin@dksh.com |
