Equipment Overview& Equipment Details
Equipment Details
Make, Model & Classification
| Name | GreenMax EPS compactor |
| Model | APOLO C100 |
| Classification | Compacting/Compressing |
Operations
| Description or Purpose | GREENMAX APOLO C100 compactor is specialized in the foam industry and manufactures recycling systems that enable the EPS and many other foam materials to reuse as much as possible in their production. |
| Operating Principles | GREENMAX APOLO C100 compactor is a EPS recycling machine, which can smash the waste EPS material into small pieces by the blades and gears, and then it could be easily compressed into tight block at a ratio of 50:1. After compaction, the waste Styrofoam can be reused to make other products, such as frame products and construction moldings. |
| Additional Information | TECHNICAL DATA: Throughput: 100kg/h Compression Ratio: 50:1 Compressed Density: 200-400kg/m3 Total Power Consumption: 10.25kw |
Photograph
Recyclables Processed & Productivity
Recyclables Processed
Target Recyclables and Productivity Rates
| Recyclable Type | Productivity - Loading Rate (kg per hour) |
Processing Capacity - Treatment (kg per week) |
Storage Capacity (kg per batch) |
Operating Life (machine hrs) |
|
|---|---|---|---|---|---|
|
Food Organics | ||||
|
|
Other Organics (garden etc.) | ||||
|
|
Flexible Plastic | ||||
|
|
Rigid Plastic | ||||
|
|
Mixed Plastics | ||||
|
Expanded Polystyrene | 100kg/h | 700kg/w | 100kg/batch | 10 years |
|
|
Glass | ||||
|
|
Paper | ||||
|
|
Cardboard | ||||
|
|
Mixed Paper & Cardboard | ||||
|
|
Timber | ||||
|
|
Other Recyclable | ||||
Productivity
Life Expectancy
| Operating Life - Years | 10 |
Level of Automation
| Operating Mode | Batch |
| Degree of Automation | Fully automated - materials placed into system and process automated |
Labour Requirements
| Number of Operators | |
| Operator Time (per cycle in mins.) |
Consumables Required
| Consumables |
Service Requirements
| Service Freq. (Tonnes) | 5 |
| Service Freq. (Months) | 6 |
| Downtime per Service (hours) | 2 |
Periodic Cleaning Requirements
| Periodic Cleaning |
Loading & Unloading Equipment
| Manual Handling Loading | Manual |
| Manual Handling Unloading | Manual |
Work Health and Safety & Permitting
Work Health and Safety
Training
| Operator Training Requirements | Training course - by OEM/supplier |
Personal Protective Equipment
|
|
Head - Hard Hat |
|
|
Eyes - Glasses |
|
|
Breathing - Mask or Respirator |
|
|
Hands - Gloves |
|
|
Feet - Industrial Footwear |
|
|
Visibility - Hi-viz Clothing |
|
|
Other PPE |
Training Material
|
|
Printed |
|
|
Video/DVD |
|
|
Web-based |
|
|
Other |
Fencing & Enclosures
|
|
Fencing |
|
|
Bunding |
|
|
Floor Reinforcing |
|
|
Covers or Shielding |
|
|
Other |
Approvals Related to Use of Output
Important Note on Composting in NSW
In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.
While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.
If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm
Installation Specifications
Installation Specifications
Utilities
|
|
Power | Volts | |
|
|
Water | KPa | l/min |
|
|
Sewer | l/min | |
|
|
Compressed Air | KPa | CuM/min |
|
|
Gas | Kjoule/hr |
Dimensions
| Length | 0 cm |
| Width | 0 cm |
| Height | 0 cm |
| Footprint | 0 sq.m |
| Weight | 0 kg |
| Lateral clearance | 0 cm |
| Overhead clearance | 0 cm |
Service Offering
|
|
Supply |
|
|
Installation |
|
|
Maintenance |
|
|
Product Uplift |
|
|
Training |
|
|
Other |
In-Feed & Out-Feed Characteristics
In-Feed Characteristics
Acceptable In-feed Characteristics
|
|
Loose |
|
|
Bundled |
|
|
Tied |
|
|
Wet |
|
|
Dry |
|
|
Shredded |
|
|
Lightly Soiled |
|
|
Heavily Soiled |
|
|
Other |
Exclusions
| Excluded Materials |
Out-Feed Characteristics
Out-feed Product Characteristics - Shape
|
|
Rectangular Prism |
|
|
Cylindrical |
|
|
Other |
Out-feed Product Characteristics - Container
|
|
Bag/Sack |
|
|
Wrapped |
|
|
Bin |
|
|
Other |
Out-feed Dimensions
| Length | cm |
| Width | cm |
| Height | cm |
| Footprint | sq.m |
| Weight | kg |
| SG | specific gravity |
| Density | kg/Cu.m |
| By-product and Wastes |
Amenity and Nuisance Issues
|
|
Noise |
|
|
Odour |
|
|
Vibration |
|
|
Light |
|
|
Heat |
|
|
Other |
Market/Recipients
|
|
Reprocessor |
|
|
End Market |
|
|
Other |
OEM & Supplier Information
OEM & Supplier Information
OEM Company Details
| Company Name | GreenMax |
| Postal Address | 12345 Mountain Ave. #N298，Chino, CA 91710 |
| State | CA |
| Country | United States |
| Postcode | 91710 |
| Web Site | https://www.greenmax-machine.com/ |
| Contact Name | Lucy Shen |
| Contact Telephone | +19099060333 |
| Contact Email | chirsluo@intco.com |
Supplier Company Details
| Company Name | GreenMax |
| Postal Address | 12345 Mountain Ave. #N298，Chino, CA 91710 |
| State | CA |
| Country | United States |
| Postcode | 91710 |
| Web Site | https://www.greenmax-machine.com/ |
| Contact Name | Lucy Shen |
| Contact Telephone | +19099060333 |
| Contact Email | chirsluo@intco.com |
