Evashred Shredder - EV85E | BusinessRecycling.com.au

Small Scale Recycling Equipment Catalogue

Evashred Shredder - EV85E
Shredding/Flaking/Grinding

The NSW EPA has strict requirements for applying organics to land.
For more information please visit the Work Health, Safety & Permitting tab.
Equipment Overview& Equipment Details

Equipment Details

Make, Model & Classification

Name Evashred Shredder
Model EV85E
Classification Shredding/Flaking/Grinding

Operations

Description or Purpose Dual shaft, slow speed, high torque industrial shredders used for the destruction and recycling of general waste products including paper and cardboard, plastic, wood, textiles, rubber, foam, electronic waste, food, glass, and organic waste.
Operating Principles Used for the purpose of destroying product into random length strips, reducing the volume for better compaction or to begin the first stage of recycling the product by using 2 counter rotating shafts with knives fitted to cut the product into random length strips at the width of the shredder's cutters.
Additional Information The Evashred EV85E is a big industrial shredder from Evashred able to process 2500kg of product per hour and is well suited to hard drives and general electronic waste products and also paper, plastic, cardboard, fabric, rubber, foam, glass and almost anything. We also offer fire suppression and dust collection systems if required.

Photograph

Evashred Shredder EV85E
Recyclables Processed & Productivity

Recyclables Processed

Target Recyclables and Productivity Rates

Recyclable Type Productivity - Loading Rate
(kg per hour)
Processing Capacity - Treatment
(kg per week)
Storage Capacity
(kg per batch)
Operating Life
(machine hrs)
Yes Food Organics 2000 - - -
Yes Other Organics (garden etc.) 2000 - - -
Yes Flexible Plastic 2000 - - -
Yes Rigid Plastic 1500
Yes Mixed Plastics 1500 - - -
Yes Expanded Polystyrene 1500 - - -
Yes Glass 1500 - - -
Yes Paper 2000 - - -
Yes Cardboard 2000 - - -
Yes Mixed Paper & Cardboard 2000 - - -
Yes Timber 1500 - - -
Yes Other Recyclable
If Other electronic waste products

Productivity

Life Expectancy

Operating Life - Years 10

Level of Automation

Operating Mode Continuous
Degree of Automation Semi-automated - operator attendance required for in-feed and operations

Labour Requirements

Number of Operators 1
Operator Time
(per cycle in mins.)
1

Consumables Required

Consumables 415 volts 50Hz 3 phase 140 amps supply power

Service Requirements

Service Freq. (Tonnes) 0
Service Freq. (Months) 12
Downtime per Service (hours) 4

Periodic Cleaning Requirements

Periodic Cleaning To be performed at the end of each day

Loading & Unloading Equipment

Manual Handling Loading Other
If Other (specify) Conveyor or bin tipper or hand feed
Manual Handling Unloading Other
If Other (specify) Conveyor or bin
Work Health and Safety & Permitting

Work Health and Safety

Training

Operator Training Requirements Training course - by OEM/supplier

Personal Protective Equipment

Yes Head - Hard Hat
Yes Eyes - Glasses
Yes Breathing - Mask or Respirator
Yes Hands - Gloves
Yes Feet - Industrial Footwear
Yes Visibility - Hi-viz Clothing
Yes Other PPE

Training Material

Yes Printed
Yes Video/DVD
Yes Web-based
Yes Other

Fencing & Enclosures

Yes Fencing
Yes Bunding
Yes Floor Reinforcing
Yes Covers or Shielding
Yes Other
If Other N/A

Approvals Related to Use of Output

Important Note on Composting in NSW

In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.

While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.

If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm

Installation Specifications

Installation Specifications

Utilities

Yes Power 415 Volts 44 kWh
Yes Water KPa l/min
Yes Sewer   - l/min
Yes Compressed Air - KPa - CuM/min
Yes Gas   - Kjoule/hr

Dimensions

Length 314 cm
Width 100 cm
Height 210 cm
Footprint 4 sq.m
Weight 2000 kg
Lateral clearance 50 cm
Overhead clearance 100 cm

Service Offering

Yes Supply
Yes Installation
Yes Maintenance
Yes Product Uplift
Yes Training
Yes Other
In-Feed & Out-Feed Characteristics

In-Feed Characteristics

Acceptable In-feed Characteristics

Yes Loose
Yes Bundled
Yes Tied
Yes Wet
Yes Dry
Yes Shredded
Yes Lightly Soiled
Yes Heavily Soiled
Yes Other
If Other 0

Exclusions

Excluded Materials Steel products over 5mm thickness, explosives

Out-Feed Characteristics

Out-feed Product Characteristics - Shape

Yes Rectangular Prism
Yes Cylindrical
Yes Other
If Other random

Out-feed Product Characteristics - Container

Yes Bag/Sack
Yes Wrapped
Yes Bin
Yes Other

Out-feed Dimensions

Length na cm
Width na cm
Height na cm
Footprint na sq.m
Weight na kg
SG na specific gravity
Density na kg/Cu.m
By-product and Wastes Reduced volumes

Amenity and Nuisance Issues

Yes Noise
- less than 79Dba
Yes Odour
- depends on waste stream
Yes Vibration
- depends on waste stream
Yes Light
Yes Heat
- electronic waste products can spark and cause fire if mixed with combustibl
Yes Other

Market/Recipients

Yes Reprocessor
Yes End Market
Yes Other
If Other N/A
OEM & Supplier Information

OEM & Supplier Information

OEM Company Details

Company Name F V Evans Engineering Ltd
Postal Address PO Box 40039 Upper Hutt, Wellington
State N/A
Country New Zealand
Postcode 5018
Web Site www.evashred.co.nz
Contact Name Neil Rees
Contact Telephone +64 04 526 9512
Contact Email sales@evansengineering.co.nz

Supplier Company Details

Company Name F V Evans Engineering Ltd
Postal Address PO Box 40039 Upper Hutt, Wellington
State N/A
Country New Zealand
Postcode 5018
Web Site www.evashred.co.nz
Contact Name Neil Rees
Contact Telephone +64 04 526 9512
Contact Email sales@evansengineering.co.nz
This project is a NSW Environment Protection Authority Waste and Sustainable Materials Strategy initiative, funded from the waste levy.