Compactor - SPC Compactor Range | BusinessRecycling.com.au

Small Scale Recycling Equipment Catalogue

Compactor - SPC Compactor Range
Compacting/Compressing

The NSW EPA has strict requirements for applying organics to land.
For more information please visit the Work Health, Safety & Permitting tab.
Equipment Overview& Equipment Details

Equipment Details

Make, Model & Classification

Name Compactor
Model SPC Compactor Range
Classification Compacting/Compressing

Operations

Description or Purpose The SPC compactors “absorb” everything: domestic and office refuse, packing materials, crates, tins foam plastics etc. These machines are preferred, due to their design, simple operation and are favoured amongst most shopping malls
Operating Principles SPC compactors are self-contained and sealed, ensuring minimal fire risk or spillage Save transport costs of up to 85%. These Compactors requires little room and don’t need any supporting means. This series is available in eight different models
Additional Information Through wall feed chutes
Through wall installation with wall on loading dock
Wheelie bin tipper
Cyclone hopper extension
Rust protection
Compactor bin variation
Rear end loading
Roll on roll off Bin
Lift On
Ozone Generator - Odour Control
Self Washing System

Photograph

Compactor SPC Compactor Range
Recyclables Processed & Productivity

Recyclables Processed

Target Recyclables and Productivity Rates

Recyclable Type Productivity - Loading Rate
(kg per hour)
Processing Capacity - Treatment
(kg per week)
Storage Capacity
(kg per batch)
Operating Life
(machine hrs)
Yes Food Organics 20m3
Yes Other Organics (garden etc.) 20m3
Yes Flexible Plastic 20m3
Yes Rigid Plastic 20m3
Yes Mixed Plastics 20m3
Yes Expanded Polystyrene 20m3
Yes Glass 20m3
Yes Paper 20m3
Yes Cardboard 20m3
Yes Mixed Paper & Cardboard 20m3
Yes Timber 20m3
Yes Other Recyclable

Productivity

Life Expectancy

Operating Life - Years 10

Level of Automation

Operating Mode Batch
Degree of Automation Fully automated - materials placed into system and process automated

Labour Requirements

Number of Operators 1
Operator Time
(per cycle in mins.)

Consumables Required

Consumables

Service Requirements

Service Freq. (Tonnes)
Service Freq. (Months) 1
Downtime per Service (hours)

Periodic Cleaning Requirements

Periodic Cleaning Self Wash System Optional

Loading & Unloading Equipment

Manual Handling Loading Manual
Manual Handling Unloading Other
If Other (specify) Tipper
Work Health and Safety & Permitting

Work Health and Safety

Training

Operator Training Requirements Familiarisation induction - by OEM/supplier

Personal Protective Equipment

Yes Head - Hard Hat
Yes Eyes - Glasses
Yes Breathing - Mask or Respirator
Yes Hands - Gloves
Yes Feet - Industrial Footwear
Yes Visibility - Hi-viz Clothing
Yes Other PPE

Training Material

Yes Printed
Yes Video/DVD
Yes Web-based
Yes Other

Fencing & Enclosures

Yes Fencing
Yes Bunding
Yes Floor Reinforcing
Yes Covers or Shielding
Yes Other

Approvals Related to Use of Output

Important Note on Composting in NSW

In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.

While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.

If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm

Installation Specifications

Installation Specifications

Utilities

Yes Power Volts
Yes Water KPa l/min
Yes Sewer   l/min
Yes Compressed Air KPa CuM/min
Yes Gas   Kjoule/hr

Dimensions

Length 0 cm
Width 0 cm
Height 0 cm
Footprint 0 sq.m
Weight 0 kg
Lateral clearance 0 cm
Overhead clearance 0 cm

Service Offering

Yes Supply
Yes Installation
Yes Maintenance
Yes Product Uplift
Yes Training
Yes Other
In-Feed & Out-Feed Characteristics

In-Feed Characteristics

Acceptable In-feed Characteristics

Yes Loose
Yes Bundled
Yes Tied
Yes Wet
Yes Dry
Yes Shredded
Yes Lightly Soiled
Yes Heavily Soiled
Yes Other

Exclusions

Excluded Materials

Out-Feed Characteristics

Out-feed Product Characteristics - Shape

Yes Rectangular Prism
Yes Cylindrical
Yes Other
If Other Mixed Waste

Out-feed Product Characteristics - Container

Yes Bag/Sack
Yes Wrapped
Yes Bin
Yes Other

Out-feed Dimensions

Length cm
Width cm
Height cm
Footprint sq.m
Weight kg
SG specific gravity
Density kg/Cu.m
By-product and Wastes

Amenity and Nuisance Issues

Yes Noise
Yes Odour
Yes Vibration
Yes Light
Yes Heat
Yes Other

Market/Recipients

Yes Reprocessor
Yes End Market
Yes Other
If Other Waste Management Companies, Council
OEM & Supplier Information

OEM & Supplier Information

OEM Company Details

Company Name Australian Recycling Equipment
Postal Address 35 Caravel Court
State QLD
Country Australia
Postcode 4163
Web Site ozrecyclingequipment.com
Contact Name Shane McClelland
Contact Telephone 0438902011
Contact Email shane@ozquip.com

Supplier Company Details

Company Name Australian Recycling Equipment
Postal Address 35 Caravel Court
State QLD
Country Australia
Postcode 4163
Web Site ozrecyclingequipment.com
Contact Name Shane McClelland
Contact Telephone 0438902011
Contact Email shane@ozquip.com
This project is a NSW Environment Protection Authority Waste and Sustainable Materials Strategy initiative, funded from the waste levy.