Equipment Overview& Equipment Details
Equipment Details
Make, Model & Classification
| Name | Cardboard Baler |
| Model | wrightway2bale |
| Classification | Compacting/Compressing |
Operations
| Description or Purpose | Vertical compacting and baling equipment for the purpose of volume reduction and on site processing and compacting of cardboard, plastics, aluminium etc. Single and multi chamber balers available for bales of 75, 150, 200, 250 & 450kg |
| Operating Principles | Hand load the cardboard/paper/plastics/aluminium into front door of machine, close door, push compact button. When waste reaches full compacted level tie off straps, place pallet in-front of machine and press button to auto eject bale onto pallet |
| Additional Information | Allows businesses to separate, compact and process waste streams on site therefore diverting the waste streams from general waste bins and landfill. Information provided here is for one model, we have smaller and larger units available depending on the waste volumes of the particular site |
Photograph
Recyclables Processed & Productivity
Recyclables Processed
Target Recyclables and Productivity Rates
| Recyclable Type | Productivity - Loading Rate (kg per hour) |
Processing Capacity - Treatment (kg per week) |
Storage Capacity (kg per batch) |
Operating Life (machine hrs) |
|
|---|---|---|---|---|---|
|
Food Organics | ||||
|
|
Other Organics (garden etc.) | ||||
|
Flexible Plastic | 150 | - | - | - |
|
|
Rigid Plastic | 150 | - | - | - |
|
|
Mixed Plastics | 150 | - | - | - |
|
|
Expanded Polystyrene | ||||
|
|
Glass | ||||
|
|
Paper | - | - | - | - |
|
|
Cardboard | 150 | - | - | - |
|
|
Mixed Paper & Cardboard | 150 | - | - | - |
|
|
Timber | ||||
|
|
Other Recyclable | ||||
| If Other | Aluminium | ||||
Productivity
Life Expectancy
| Operating Life - Years | 10 |
Level of Automation
| Operating Mode | Continuous |
| Degree of Automation | Fully automated - materials placed into system and process automated |
Labour Requirements
| Number of Operators | 1 |
| Operator Time (per cycle in mins.) |
1 |
Consumables Required
| Consumables | Strapping |
Service Requirements
| Service Freq. (Tonnes) | 0 |
| Service Freq. (Months) | 12 |
| Downtime per Service (hours) | 1 |
Periodic Cleaning Requirements
| Periodic Cleaning | General wipe over of machine if and when required |
Loading & Unloading Equipment
| Manual Handling Loading | Manual |
| Manual Handling Unloading | Other |
| If Other (specify) | Bale auto ejected |
Work Health and Safety & Permitting
Work Health and Safety
Training
| Operator Training Requirements | Familiarisation induction - by OEM/supplier |
Personal Protective Equipment
|
|
Head - Hard Hat |
|
|
Eyes - Glasses |
|
|
Breathing - Mask or Respirator |
|
|
Hands - Gloves |
|
|
Feet - Industrial Footwear |
|
|
Visibility - Hi-viz Clothing |
|
|
Other PPE |
Training Material
|
|
Printed |
|
|
Video/DVD |
|
|
Web-based |
|
|
Other |
| If Other | Access to manufacturer / supplier |
Fencing & Enclosures
|
|
Fencing |
|
|
Bunding |
|
|
Floor Reinforcing |
|
|
Covers or Shielding |
|
|
Other |
Approvals Related to Use of Output
Important Note on Composting in NSW
In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.
While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.
If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm
Installation Specifications
Installation Specifications
Utilities
|
|
Power | 240 Volts | 2.2 kWh |
|
|
Water | KPa | - l/min |
|
|
Sewer | - l/min | |
|
|
Compressed Air | - KPa | - CuM/min |
|
|
Gas | - Kjoule/hr |
Dimensions
| Length | 98 cm |
| Width | 150 cm |
| Height | 280 cm |
| Footprint | 2 sq.m |
| Weight | 780 kg |
| Lateral clearance | 45 cm |
| Overhead clearance | 50 cm |
Service Offering
|
|
Supply |
|
|
Installation |
|
|
Maintenance |
|
|
Product Uplift |
|
|
Training |
|
|
Other |
In-Feed & Out-Feed Characteristics
In-Feed Characteristics
Acceptable In-feed Characteristics
|
|
Loose |
|
|
Bundled |
|
|
Tied |
|
|
Wet |
|
|
Dry |
|
|
Shredded |
|
|
Lightly Soiled |
|
|
Heavily Soiled |
|
|
Other |
| If Other | Frozen or above 60 degrees C |
Exclusions
| Excluded Materials | N/A |
Out-Feed Characteristics
Out-feed Product Characteristics - Shape
|
|
Rectangular Prism |
|
|
Cylindrical |
|
|
Other |
Out-feed Product Characteristics - Container
|
|
Bag/Sack |
|
|
Wrapped |
|
|
Bin |
|
|
Other |
Out-feed Dimensions
| Length | 80 cm |
| Width | 120 cm |
| Height | 100 cm |
| Footprint | 1 sq.m |
| Weight | 150 kg |
| SG | - specific gravity |
| Density | 1 kg/Cu.m |
| By-product and Wastes | 0 |
Amenity and Nuisance Issues
|
|
Noise - Low level when compacting |
|
|
Odour |
|
|
Vibration |
|
|
Light |
|
|
Heat |
|
|
Other |
Market/Recipients
|
|
Reprocessor |
|
|
End Market |
|
|
Other |
OEM & Supplier Information
OEM & Supplier Information
OEM Company Details
| Company Name | Wrightway Products |
| Postal Address | PO Box 6296, South Lismore |
| State | NSW |
| Country | Australia |
| Postcode | 2480 |
| Web Site | www.wrightway.com.au |
| Contact Name | Jenna |
| Contact Telephone | +61 (0)2 6622 7111 |
| Contact Email | jenn@wrightway.com.au |
Supplier Company Details
| Company Name | Wrightway Products |
| Postal Address | PO Box 6296, South Lismore |
| State | NSW |
| Country | Australia |
| Postcode | 2480 |
| Web Site | www.wrightway.com.au |
| Contact Name | Jenna |
| Contact Telephone | +61 (0)2 6622 7111 |
| Contact Email | jenn@wrightway.com.au |
