BiobiN 4.5 cubic metre system - 4.5 S | BusinessRecycling.com.au

Small Scale Recycling Equipment Catalogue

BiobiN 4.5 cubic metre system - 4.5 S
Organics Processing

The NSW EPA has strict requirements for applying organics to land.
For more information please visit the Work Health, Safety & Permitting tab.
Equipment Overview& Equipment Details

Equipment Details

Make, Model & Classification

Name BiobiN 4.5 cubic metre system
Model 4.5 S
Classification Organics Processing

Operations

Description or Purpose The BiobiN 4.5 cu.m. system is for capture, containment and processing of organic recyclable materials. The system can be equipped with small access hatches for easy filling and is also compatible with MGB lifting units. Exchange / servicing is only required when full. This system usually captures between 2.5 and 3.5 tonne of organics.
Operating Principles The BiobiN system is designed to capture and commence processing of organic recyclables. The system is designed to remain in situ for extended periods minimising transport costs. To obtain best results, dry carbon based material is required to be added with wet organics. This material may include shredded paper, cardboard, garden waste, etc. Filling can take place in a day or over several months.
Additional Information Consideration needs to be given to placement of the system to allow heavy vehicle access to the system and for the purpose of maintaining a clean environment around the system.

Photograph

BiobiN 4.5 cubic metre system 4.5 S
Recyclables Processed & Productivity

Recyclables Processed

Target Recyclables and Productivity Rates

Recyclable Type Productivity - Loading Rate
(kg per hour)
Processing Capacity - Treatment
(kg per week)
Storage Capacity
(kg per batch)
Operating Life
(machine hrs)
Yes Food Organics - 2500 3000 -
Yes Other Organics (garden etc.) - 2000 2500 -
Yes Flexible Plastic - - - -
Yes Rigid Plastic - - - -
Yes Mixed Plastics - - - -
Yes Expanded Polystyrene - - - -
Yes Glass - - - -
Yes Paper - - - -
Yes Cardboard - - - -
Yes Mixed Paper & Cardboard - - - -
Yes Timber - - - -
Yes Other Recyclable

Productivity

Life Expectancy

Operating Life - Years 15

Level of Automation

Operating Mode Continuous
Degree of Automation Semi-automated - operator attendance required for in-feed and operations

Labour Requirements

Number of Operators 1
Operator Time
(per cycle in mins.)
2

Consumables Required

Consumables N/A

Service Requirements

Service Freq. (Tonnes) Other
Service Freq. (Months) 2
Downtime per Service (hours) Other

Periodic Cleaning Requirements

Periodic Cleaning System is cleaned and reset after each exchange

Loading & Unloading Equipment

Manual Handling Loading Manual
Manual Handling Unloading Other
If Other (specify) None required
Work Health and Safety & Permitting

Work Health and Safety

Training

Operator Training Requirements Qualification - by accredited third party

Personal Protective Equipment

Yes Head - Hard Hat
Yes Eyes - Glasses
Yes Breathing - Mask or Respirator
Yes Hands - Gloves
Yes Feet - Industrial Footwear
Yes Visibility - Hi-viz Clothing
Yes Other PPE

Training Material

Yes Printed
Yes Video/DVD
Yes Web-based
Yes Other

Fencing & Enclosures

Yes Fencing
Yes Bunding
Yes Floor Reinforcing
Yes Covers or Shielding
Yes Other

Approvals Related to Use of Output

Important Note on Composting in NSW

In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.

While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.

If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm

Installation Specifications

Installation Specifications

Utilities

Yes Power 240 Volts 1 kWh
Yes Water 0 KPa l/min
Yes Sewer   - l/min
Yes Compressed Air - KPa - CuM/min
Yes Gas   - Kjoule/hr

Dimensions

Length 380 cm
Width 1750 cm
Height 130 cm
Footprint 16 sq.m
Weight 650 kg
Lateral clearance 30 cm
Overhead clearance 440 cm

Service Offering

Yes Supply
Yes Installation
Yes Maintenance
Yes Product Uplift
Yes Training
Yes Other
If Other
In-Feed & Out-Feed Characteristics

In-Feed Characteristics

Acceptable In-feed Characteristics

Yes Loose
Yes Bundled
Yes Tied
Yes Wet
Yes Dry
Yes Shredded
Yes Lightly Soiled
Yes Heavily Soiled
Yes Other
If Other 0

Exclusions

Excluded Materials Inorganic materials excluded

Out-Feed Characteristics

Out-feed Product Characteristics - Shape

Yes Rectangular Prism
Yes Cylindrical
Yes Other
If Other No output at customer site

Out-feed Product Characteristics - Container

Yes Bag/Sack
Yes Wrapped
Yes Bin
Yes Other

Out-feed Dimensions

Length - cm
Width - cm
Height - cm
Footprint - sq.m
Weight - kg
SG - specific gravity
Density - kg/Cu.m
By-product and Wastes Small amount of liquid waste

Amenity and Nuisance Issues

Yes Noise
Yes Odour
Yes Vibration
Yes Light
Yes Heat
Yes Other
If Other NR to be placed near air intakes/vents

Market/Recipients

Yes Reprocessor
Yes End Market
Yes Other
If Other Commercial organics processor preferred
OEM & Supplier Information

OEM & Supplier Information

OEM Company Details

Company Name BiobiN Technologies
Postal Address PO Box 66, Willunga
State SA
Country Australia
Postcode 5172
Web Site www.biobin.net
Contact Name John Hogarth
Contact Telephone (08) 8556 5295
Contact Email john@biobin.net

Supplier Company Details

Company Name Resource Recovery Management
Postal Address PO Box 3049, Grosevale
State NSW
Country Australia
Postcode 2753
Web Site www.resrecovery.com.au
Contact Name Chris Graham
Contact Telephone +61 (0)2 4572 2011
Contact Email chris@resrecovery.com.au
This project is a NSW Environment Protection Authority Waste and Sustainable Materials Strategy initiative, funded from the waste levy.