Equipment Overview& Equipment Details
Equipment Details
Make, Model & Classification
| Name | Baler: Pneumatic |
| Model | Mil-tek Model H600 |
| Classification | Baling |
Operations
| Description or Purpose | For the baling of cardboard, plastic film and other compactable recyclables. |
| Operating Principles | Convenient pop-up door design allows for use in tighter locations. This can also be programmed to automatically open upon completion of pressing cycle leaving door open as operator approaches with next load. Feed in large volumes of material with each loading, no need to wait once filled, walk away as the machine goes through its pressing cycle unattended. "Easyloop" wires for wire tie off. Bale out is mechanically assisted onto a pallet or trolley. Full training and photographic simple instructions are provided with every installation. Video training resources are also available. |
| Additional Information | The H600 is a industrial scale baler making a mill sized bale tradable on the commodity market. It is a very versatile machine, utilised for a variety of baled materials. German engineered and built, with ultimate durability. Fully serviced by Mil-tek technicians in most areas. Two features make this machine unique. Firstly the low head height means the unit can be installed in normal ceiling height areas. Secondly the automatic pop-up door allows for great operator efficiency. |
Photograph
Recyclables Processed & Productivity
Recyclables Processed
Target Recyclables and Productivity Rates
| Recyclable Type | Productivity - Loading Rate (kg per hour) |
Processing Capacity - Treatment (kg per week) |
Storage Capacity (kg per batch) |
Operating Life (machine hrs) |
|
|---|---|---|---|---|---|
|
Food Organics | ||||
|
|
Other Organics (garden etc.) | ||||
|
Flexible Plastic | 900 | - | - | - |
|
|
Rigid Plastic | 600 | - | - | - |
|
|
Mixed Plastics | 900 | - | - | - |
|
|
Expanded Polystyrene | ||||
|
|
Glass | ||||
|
|
Paper | 1000 | - | - | - |
|
|
Cardboard | 1000 | - | - | - |
|
|
Mixed Paper & Cardboard | 1000 | - | - | - |
|
|
Timber | ||||
|
|
Other Recyclable | ||||
Productivity
Life Expectancy
| Operating Life - Years | 15 |
Level of Automation
| Operating Mode | Batch |
| Degree of Automation | Other |
| If Other (specify) | Attendance only to bale out. 5 minute process, usually less than once per day. |
Labour Requirements
| Number of Operators | 1 |
| Operator Time (per cycle in mins.) |
0 |
Consumables Required
| Consumables | Metal Eazyloop ties |
Service Requirements
| Service Freq. (Tonnes) | 0 |
| Service Freq. (Months) | 12 |
| Downtime per Service (hours) | 3 |
Periodic Cleaning Requirements
| Periodic Cleaning | Dependant on material compressed. Recommend weekly wipe down to extend equipment life. |
Loading & Unloading Equipment
| Manual Handling Loading | Manual |
| Manual Handling Unloading | Manual |
Work Health and Safety & Permitting
Work Health and Safety
Training
| Operator Training Requirements | Familiarisation induction - by OEM/supplier |
Personal Protective Equipment
|
|
Head - Hard Hat |
|
|
Eyes - Glasses |
|
|
Breathing - Mask or Respirator |
|
|
Hands - Gloves |
|
|
Feet - Industrial Footwear |
|
|
Visibility - Hi-viz Clothing |
|
|
Other PPE |
Training Material
|
|
Printed |
|
|
Video/DVD |
|
|
Web-based |
|
|
Other |
Fencing & Enclosures
|
|
Fencing |
|
|
Bunding |
|
|
Floor Reinforcing |
|
|
Covers or Shielding |
|
|
Other |
Approvals Related to Use of Output
Important Note on Composting in NSW
In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.
While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.
If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm
Installation Specifications
Installation Specifications
Utilities
|
|
Power | 415 Volts | 7.5 kWh |
|
|
Water | KPa | - l/min |
|
|
Sewer | - l/min | |
|
|
Compressed Air | 6-8 KPa | 90 CuM/min |
|
|
Gas | - Kjoule/hr |
Dimensions
| Length | 140 cm |
| Width | 189 cm |
| Height | 217 cm |
| Footprint | 2.1 sq.m |
| Weight | 2430 kg |
| Lateral clearance | 10 cm |
| Overhead clearance | 5 cm |
Service Offering
|
|
Supply |
|
|
Installation |
|
|
Maintenance |
|
|
Product Uplift |
|
|
Training |
|
|
Other |
| If Other |
In-Feed & Out-Feed Characteristics
In-Feed Characteristics
Acceptable In-feed Characteristics
|
|
Loose |
|
|
Bundled |
|
|
Tied |
|
|
Wet |
|
|
Dry |
|
|
Shredded |
|
|
Lightly Soiled |
|
|
Heavily Soiled |
|
|
Other |
| If Other | 0 |
Exclusions
| Excluded Materials | Aerosols cans, lidded cans, explosives canisters |
Out-Feed Characteristics
Out-feed Product Characteristics - Shape
|
|
Rectangular Prism |
|
|
Cylindrical |
|
|
Other |
Out-feed Product Characteristics - Container
|
|
Bag/Sack |
|
|
Wrapped |
|
|
Bin |
|
|
Other |
Out-feed Dimensions
| Length | 110 cm |
| Width | 120 cm |
| Height | 80 cm |
| Footprint | 1 sq.m |
| Weight | 350-450 kg |
| SG | - specific gravity |
| Density | 473 kg/Cu.m |
| By-product and Wastes | NIL |
Amenity and Nuisance Issues
|
|
Noise |
|
|
Odour |
|
|
Vibration |
|
|
Light |
|
|
Heat |
|
|
Other |
Market/Recipients
|
|
Reprocessor |
|
|
End Market |
|
|
Other |
OEM & Supplier Information
OEM & Supplier Information
OEM Company Details
| Company Name | Mil-tek Waste Solutions |
| Postal Address | 3 Tindal Rd, Tuggerah |
| State | NSW |
| Country | Australia |
| Postcode | 2259 |
| Web Site | www.miltek.com.au |
| Contact Name | Jason Campbell |
| Contact Telephone | 0476 508 500 |
| Contact Email | jason.campbell@miltek.com.au |
Supplier Company Details
| Company Name | Mil-tek Waste Solutions |
| Postal Address | 3 Tindal Rd, Tuggerah |
| State | NSW |
| Country | Australia |
| Postcode | 2259 |
| Web Site | www.miltek.com.au |
| Contact Name | Jason Campbell |
| Contact Telephone | 0476 508 500 |
| Contact Email | jason.campbell@miltek.com.au |
