Equipment Overview& Equipment Details
Equipment Details
Make, Model & Classification
| Name | Baler: Pneumatic |
| Model | Mil-tek Model A406 |
| Classification | Baling |
Operations
| Description or Purpose | For the baling of cardboard, plastic film and other compactable recyclables. |
| Operating Principles | Mil-tek design their equipment to be simple. Ultra simple. "If you can tie your shoes, and use a fridge, you can use this machine". Open door, place in materials, close door, walk away. Roughly equivalent to every 7-9m3 (of whole cardboard), the machine will be full, and baling out is required. This is a 3 step, 2 minute process. Full training and photographic simple instructions are provided with every installation. Video training resources are also available. |
| Additional Information | Save labour by placing the machine inside the premises and make it easy to divert cardboard overflow out of the general waste bin because it is now closer and easier to use. Limitless cardboard space means no overflow to general waste. Air powered: Food safe - no toxic hydraulic oils to add food risk, mess, or to dispose of upon servicing. Virtually silent. Most energy efficient machine. Small footprint: Can fit through standard doorway. The machine can be put right in close to where the waste is generated. |
Photograph
Recyclables Processed & Productivity
Recyclables Processed
Target Recyclables and Productivity Rates
| Recyclable Type | Productivity - Loading Rate (kg per hour) |
Processing Capacity - Treatment (kg per week) |
Storage Capacity (kg per batch) |
Operating Life (machine hrs) |
|
|---|---|---|---|---|---|
|
Food Organics | ||||
|
|
Other Organics (garden etc.) | ||||
|
Flexible Plastic | 450 | - | - | - |
|
|
Rigid Plastic | 250 | - | - | - |
|
|
Mixed Plastics | 450 | - | - | - |
|
|
Expanded Polystyrene | ||||
|
|
Glass | ||||
|
|
Paper | 400 | - | - | - |
|
|
Cardboard | 250 | - | - | - |
|
|
Mixed Paper & Cardboard | 325 | - | - | - |
|
|
Timber | ||||
|
|
Other Recyclable | ||||
| If Other | N/A | ||||
Productivity
Life Expectancy
| Operating Life - Years | 15 |
Level of Automation
| Operating Mode | Batch |
| Degree of Automation | Other |
| If Other (specify) | Attendance only to bale out. 2 minute process, usually less than once per day. |
Labour Requirements
| Number of Operators | 1 |
| Operator Time (per cycle in mins.) |
0 |
Consumables Required
| Consumables | Bale banding |
Service Requirements
| Service Freq. (Tonnes) | 0 |
| Service Freq. (Months) | 12 |
| Downtime per Service (hours) | 1 |
Periodic Cleaning Requirements
| Periodic Cleaning | Dependant on material compressed. Recommend weekly wipe down to extend equipment life. |
Loading & Unloading Equipment
| Manual Handling Loading | Manual |
| Manual Handling Unloading | Manual |
Work Health and Safety & Permitting
Work Health and Safety
Training
| Operator Training Requirements | Familiarisation induction - by OEM/supplier |
Personal Protective Equipment
|
|
Head - Hard Hat |
|
|
Eyes - Glasses |
|
|
Breathing - Mask or Respirator |
|
|
Hands - Gloves |
|
|
Feet - Industrial Footwear |
|
|
Visibility - Hi-viz Clothing |
|
|
Other PPE |
Training Material
|
|
Printed |
|
|
Video/DVD |
|
|
Web-based |
|
|
Other |
Fencing & Enclosures
|
|
Fencing |
|
|
Bunding |
|
|
Floor Reinforcing |
|
|
Covers or Shielding |
|
|
Other |
Approvals Related to Use of Output
Important Note on Composting in NSW
In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.
While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.
If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm
Installation Specifications
Installation Specifications
Utilities
|
|
Power | - Volts | - |
|
|
Water | KPa | - l/min |
|
|
Sewer | - l/min | |
|
|
Compressed Air | 6-8 KPa | 180 CuM/min |
|
|
Gas | - Kjoule/hr |
Dimensions
| Length | 94 cm |
| Width | 100 cm |
| Height | 242 cm |
| Footprint | 0.9 sq.m |
| Weight | 555 kg |
| Lateral clearance | 10 cm |
| Overhead clearance | 5 cm |
Service Offering
|
|
Supply |
|
|
Installation |
|
|
Maintenance |
|
|
Product Uplift |
|
|
Training |
|
|
Other |
| If Other |
In-Feed & Out-Feed Characteristics
In-Feed Characteristics
Acceptable In-feed Characteristics
|
|
Loose |
|
|
Bundled |
|
|
Tied |
|
|
Wet |
|
|
Dry |
|
|
Shredded |
|
|
Lightly Soiled |
|
|
Heavily Soiled |
|
|
Other |
| If Other | 0 |
Exclusions
| Excluded Materials | Aerosols cans, lidded cans, explosives canisters |
Out-Feed Characteristics
Out-feed Product Characteristics - Shape
|
|
Rectangular Prism |
|
|
Cylindrical |
|
|
Other |
Out-feed Product Characteristics - Container
|
|
Bag/Sack |
|
|
Wrapped |
|
|
Bin |
|
|
Other |
Out-feed Dimensions
| Length | 73 cm |
| Width | 89 cm |
| Height | 88 cm |
| Footprint | 1 sq.m |
| Weight | 125-225 kg |
| SG | - specific gravity |
| Density | 394 kg/Cu.m |
| By-product and Wastes | NIL |
Amenity and Nuisance Issues
|
|
Noise |
|
|
Odour |
|
|
Vibration |
|
|
Light |
|
|
Heat |
|
|
Other |
Market/Recipients
|
|
Reprocessor |
|
|
End Market |
|
|
Other |
OEM & Supplier Information
OEM & Supplier Information
OEM Company Details
| Company Name | Mil-tek Waste Solutions |
| Postal Address | 3 Tindal Rd, Tuggerah |
| State | NSW |
| Country | Australia |
| Postcode | 2259 |
| Web Site | www.miltek.com.au |
| Contact Name | Jason Campbell |
| Contact Telephone | +61 (0)432 735 233 |
| Contact Email | jason.campbell@miltek.com.au |
Supplier Company Details
| Company Name | Mil-tek Waste Solutions |
| Postal Address | 3 Tindal Rd, Tuggerah |
| State | NSW |
| Country | Australia |
| Postcode | 2259 |
| Web Site | www.miltek.com.au |
| Contact Name | Jason Campbell |
| Contact Telephone | +61 (0)432 735 233 |
| Contact Email | jason.campbell@miltek.com.au |
