Equipment Overview& Equipment Details
Equipment Details
Make, Model & Classification
| Name | Baler |
| Model | E319 |
| Classification | Baling , Compacting/Compressing |
Operations
| Description or Purpose | The E319 Cardboard & Plastic Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a steady stream of cardboard and plastic waste and packaging. |
| Operating Principles | The Electric E319 is a quiet-running electro-mechanical baler. Featuring a spindle-driven pressing plate, the E319 quietly compresses material with up to 15 tonnes of pressing force. The E319 has a modern control system to start the machine and activate the pressing cycle and the pressing plate has a constant pressure feature, which locks the pressing plate in place to further compact material, without any further electrical use. |
| Additional Information | •High compaction pressure •Electric: almost silent running 57 dB (A) •Electric: no hydraulic oil •Plug'n'Press: modern control system •Constant Pressure: Locks pressing plate in place •Safe and easy built-in bale ejection |
Photograph
Recyclables Processed & Productivity
Recyclables Processed
Target Recyclables and Productivity Rates
| Recyclable Type | Productivity - Loading Rate (kg per hour) |
Processing Capacity - Treatment (kg per week) |
Storage Capacity (kg per batch) |
Operating Life (machine hrs) |
|
|---|---|---|---|---|---|
|
Food Organics | ||||
|
|
Other Organics (garden etc.) | ||||
|
Flexible Plastic | 100 | |||
|
|
Rigid Plastic | ||||
|
|
Mixed Plastics | 80 | |||
|
|
Expanded Polystyrene | ||||
|
|
Glass | ||||
|
|
Paper | 100 | |||
|
|
Cardboard | 80 | |||
|
|
Mixed Paper & Cardboard | 90 | |||
|
|
Timber | ||||
|
|
Other Recyclable | ||||
| If Other | Plastic bottles or aluminium cans | ||||
Productivity
Life Expectancy
| Operating Life - Years | 20 |
Level of Automation
| Operating Mode | Batch |
| Degree of Automation | Semi-automated - operator attendance required for in-feed and operations |
Labour Requirements
| Number of Operators | 1 |
| Operator Time (per cycle in mins.) |
1 |
Consumables Required
| Consumables | Bale banding 9mm |
Service Requirements
| Service Freq. (Tonnes) | |
| Service Freq. (Months) | 12 |
| Downtime per Service (hours) | 1 |
Periodic Cleaning Requirements
| Periodic Cleaning | Clean down loose debri after bale ejection |
Loading & Unloading Equipment
| Manual Handling Loading | Manual |
| Manual Handling Unloading | Mechanical Loader |
Work Health and Safety & Permitting
Work Health and Safety
Training
| Operator Training Requirements | Qualification - by accredited third party |
Personal Protective Equipment
|
|
Head - Hard Hat |
|
|
Eyes - Glasses |
|
|
Breathing - Mask or Respirator |
|
|
Hands - Gloves |
|
|
Feet - Industrial Footwear |
|
|
Visibility - Hi-viz Clothing |
|
|
Other PPE |
Training Material
|
|
Printed |
|
|
Video/DVD |
|
|
Web-based |
|
|
Other |
Fencing & Enclosures
|
|
Fencing |
|
|
Bunding |
|
|
Floor Reinforcing |
|
|
Covers or Shielding |
|
|
Other |
Approvals Related to Use of Output
Important Note on Composting in NSW
In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.
While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.
If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm
Installation Specifications
Installation Specifications
Utilities
|
|
Power | Volts | |
|
|
Water | KPa | l/min |
|
|
Sewer | l/min | |
|
|
Compressed Air | KPa | CuM/min |
|
|
Gas | Kjoule/hr |
Dimensions
| Length | 0 cm |
| Width | 0 cm |
| Height | 0 cm |
| Footprint | 0 sq.m |
| Weight | 0 kg |
| Lateral clearance | 0 cm |
| Overhead clearance | 0 cm |
Service Offering
|
|
Supply |
|
|
Installation |
|
|
Maintenance |
|
|
Product Uplift |
|
|
Training |
|
|
Other |
In-Feed & Out-Feed Characteristics
In-Feed Characteristics
Acceptable In-feed Characteristics
|
|
Loose |
|
|
Bundled |
|
|
Tied |
|
|
Wet |
|
|
Dry |
|
|
Shredded |
|
|
Lightly Soiled |
|
|
Heavily Soiled |
|
|
Other |
Exclusions
| Excluded Materials |
Out-Feed Characteristics
Out-feed Product Characteristics - Shape
|
|
Rectangular Prism |
|
|
Cylindrical |
|
|
Other |
Out-feed Product Characteristics - Container
|
|
Bag/Sack |
|
|
Wrapped |
|
|
Bin |
|
|
Other |
Out-feed Dimensions
| Length | cm |
| Width | cm |
| Height | cm |
| Footprint | sq.m |
| Weight | kg |
| SG | specific gravity |
| Density | kg/Cu.m |
| By-product and Wastes |
Amenity and Nuisance Issues
|
|
Noise |
|
|
Odour |
|
|
Vibration |
|
|
Light |
|
|
Heat |
|
|
Other |
Market/Recipients
|
|
Reprocessor |
|
|
End Market |
|
|
Other |
OEM & Supplier Information
OEM & Supplier Information
OEM Company Details
| Company Name | Mil-tek Waste Solutions |
| Postal Address | 3 Tindal Rd, Tuggerah |
| State | NSW |
| Country | Australia |
| Postcode | 2259 |
| Web Site | www.miltek.com.au |
| Contact Name | Jason Campbell |
| Contact Telephone | 0476 508 500 |
| Contact Email | jason.campbell@miltek.com.au |
Supplier Company Details
| Company Name | Mil-tek Waste Solutions |
| Postal Address | 3 Tindal Rd, Tuggerah |
| State | NSW |
| Country | Australia |
| Postcode | 2259 |
| Web Site | www.miltek.com.au |
| Contact Name | Jason Campbell |
| Contact Telephone | 0476 508 500 |
| Contact Email | jason.campbell@miltek.com.au |
