Equipment Overview& Equipment Details
Equipment Details
Make, Model & Classification
| Name | Baler |
| Model | Baler E619 |
| Classification | Baling , Compacting/Compressing |
Operations
| Description or Purpose | E619 with the unique self-lubricating worm drive (no hydraulic oil) is appreciated all over the world and a result of 50 years of designing and manufacturing balers. The E619 is designed for large volumes of Plastic and Cardboard waste. |
| Operating Principles | The E619 is an silent-running electro-mechanical baler, fast, easy and safe to work with. It has a door magnetic safety switch and inductive sensors. Customized functions can easily be switched on/off. The unique construction gives this baler small dimensions, a large feed opening and good bale weight. Material that can be compacted is paper, cardboard, plastics etc. profitable recycling with care for the environment. |
| Additional Information | Very low noise level • Convenient operating height • Compacts most material, like paper, cardboard and soft plastic • Can be moved by a pallet truck and placed near waste source • Very reliable, proven long-lasting performance, even out-doors • High compaction pressure and generous feed opening on minimum floor space |
Photograph
Recyclables Processed & Productivity
Recyclables Processed
Target Recyclables and Productivity Rates
| Recyclable Type | Productivity - Loading Rate (kg per hour) |
Processing Capacity - Treatment (kg per week) |
Storage Capacity (kg per batch) |
Operating Life (machine hrs) |
|
|---|---|---|---|---|---|
|
Food Organics | ||||
|
|
Other Organics (garden etc.) | ||||
|
Flexible Plastic | 400 | |||
|
|
Rigid Plastic | ||||
|
|
Mixed Plastics | ||||
|
|
Expanded Polystyrene | ||||
|
|
Glass | ||||
|
|
Paper | ||||
|
|
Cardboard | 300 | |||
|
|
Mixed Paper & Cardboard | 340 | |||
|
|
Timber | ||||
|
|
Other Recyclable | ||||
Productivity
Life Expectancy
| Operating Life - Years |
Level of Automation
| Operating Mode | Batch |
| Degree of Automation | Fully automated - materials placed into system and process automated |
Labour Requirements
| Number of Operators | |
| Operator Time (per cycle in mins.) |
Consumables Required
| Consumables |
Service Requirements
| Service Freq. (Tonnes) | |
| Service Freq. (Months) | |
| Downtime per Service (hours) |
Periodic Cleaning Requirements
| Periodic Cleaning |
Loading & Unloading Equipment
| Manual Handling Loading | Manual |
| Manual Handling Unloading | Manual |
Work Health and Safety & Permitting
Work Health and Safety
Training
| Operator Training Requirements | Qualification - by accredited third party |
Personal Protective Equipment
|
|
Head - Hard Hat |
|
|
Eyes - Glasses |
|
|
Breathing - Mask or Respirator |
|
|
Hands - Gloves |
|
|
Feet - Industrial Footwear |
|
|
Visibility - Hi-viz Clothing |
|
|
Other PPE |
Training Material
|
|
Printed |
|
|
Video/DVD |
|
|
Web-based |
|
|
Other |
Fencing & Enclosures
|
|
Fencing |
|
|
Bunding |
|
|
Floor Reinforcing |
|
|
Covers or Shielding |
|
|
Other |
Approvals Related to Use of Output
Important Note on Composting in NSW
In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.
While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.
If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm
Installation Specifications
Installation Specifications
Utilities
|
|
Power | Volts | |
|
|
Water | KPa | l/min |
|
|
Sewer | l/min | |
|
|
Compressed Air | KPa | CuM/min |
|
|
Gas | Kjoule/hr |
Dimensions
| Length | 0 cm |
| Width | 0 cm |
| Height | 0 cm |
| Footprint | 0 sq.m |
| Weight | 0 kg |
| Lateral clearance | 0 cm |
| Overhead clearance | 0 cm |
Service Offering
|
|
Supply |
|
|
Installation |
|
|
Maintenance |
|
|
Product Uplift |
|
|
Training |
|
|
Other |
In-Feed & Out-Feed Characteristics
In-Feed Characteristics
Acceptable In-feed Characteristics
|
|
Loose |
|
|
Bundled |
|
|
Tied |
|
|
Wet |
|
|
Dry |
|
|
Shredded |
|
|
Lightly Soiled |
|
|
Heavily Soiled |
|
|
Other |
Exclusions
| Excluded Materials |
Out-Feed Characteristics
Out-feed Product Characteristics - Shape
|
|
Rectangular Prism |
|
|
Cylindrical |
|
|
Other |
Out-feed Product Characteristics - Container
|
|
Bag/Sack |
|
|
Wrapped |
|
|
Bin |
|
|
Other |
Out-feed Dimensions
| Length | cm |
| Width | cm |
| Height | cm |
| Footprint | sq.m |
| Weight | kg |
| SG | specific gravity |
| Density | kg/Cu.m |
| By-product and Wastes |
Amenity and Nuisance Issues
|
|
Noise |
|
|
Odour |
|
|
Vibration |
|
|
Light |
|
|
Heat |
|
|
Other |
Market/Recipients
|
|
Reprocessor |
|
|
End Market |
|
|
Other |
OEM & Supplier Information
OEM & Supplier Information
OEM Company Details
| Company Name | Mil-tek Waste Solutions |
| Postal Address | 3 Tindal Rd, Tuggerah |
| State | NSW |
| Country | Australia |
| Postcode | 2259 |
| Web Site | www.miltek.com.au |
| Contact Name | Jason Campbell |
| Contact Telephone | 0476 508 500 |
| Contact Email | jason.campbell@miltek.com.au |
Supplier Company Details
| Company Name | Mil-tek Waste Solutions |
| Postal Address | 3 Tindal Rd, Tuggerah |
| State | NSW |
| Country | Australia |
| Postcode | 2259 |
| Web Site | www.miltek.com.au |
| Contact Name | Jason Campbell |
| Contact Telephone | 0476 508 500 |
| Contact Email | jason.campbell@miltek.com.au |
