Equipment Overview& Equipment Details
Equipment Details
Make, Model & Classification
| Name | Autobaler |
| Model | Ti350 |
| Classification | Baling |
Operations
| Description or Purpose | The Autobaler is designed to compact waste cardboard or plastic into a manually tied bale which can be on-sold realising the owner a financial return for what is generally a cost to the business. |
| Operating Principles | The Autobaler will auto sense materials placed into the open top of the Baler. It automatically compresses the bale chamber until it is full, indicated by an alarm. The Bale is then tied off, the pressing fingers retract and the bale auto ejects for machine onto supplied trolley. This style of machine is greatly more time efficient than the front loading vertical style baler. Conveyor/Bin Lift feed options available. |
| Additional Information | Autobaler can be fitted with Bin Lifter or Conveyor feed at extra cost. Autobaler can be fitted with separate plastic baler combo at extra cost. Warranty option for 5 year all inclusive maintenance. |
Photograph
Recyclables Processed & Productivity
Recyclables Processed
Target Recyclables and Productivity Rates
| Recyclable Type | Productivity - Loading Rate (kg per hour) |
Processing Capacity - Treatment (kg per week) |
Storage Capacity (kg per batch) |
Operating Life (machine hrs) |
|
|---|---|---|---|---|---|
|
Food Organics | ||||
|
|
Other Organics (garden etc.) | ||||
|
Flexible Plastic | - | - | - | - |
|
|
Rigid Plastic | - | - | - | - |
|
|
Mixed Plastics | - | - | - | - |
|
|
Expanded Polystyrene | - | - | - | - |
|
|
Glass | ||||
|
|
Paper | - | 9800 | - | - |
|
|
Cardboard | - | 9800 | - | - |
|
|
Mixed Paper & Cardboard | - | 9800 | - | - |
|
|
Timber | ||||
|
|
Other Recyclable | ||||
| If Other | Bulka Bags | ||||
Productivity
Life Expectancy
| Operating Life - Years | 10 |
Level of Automation
| Operating Mode | Continuous |
| Degree of Automation | Other |
| If Other (specify) | Fully automatic except for bale tie off. |
Labour Requirements
| Number of Operators | 1 |
| Operator Time (per cycle in mins.) |
0 |
Consumables Required
| Consumables | Twine |
Service Requirements
| Service Freq. (Tonnes) | 0 |
| Service Freq. (Months) | 4 |
| Downtime per Service (hours) | 1.5 |
Periodic Cleaning Requirements
| Periodic Cleaning | Dependant upon usage - Nominal daily sweep under end frames |
Loading & Unloading Equipment
| Manual Handling Loading | Manual |
| Manual Handling Unloading | Other |
| If Other (specify) | Trolley - supplied |
Work Health and Safety & Permitting
Work Health and Safety
Training
| Operator Training Requirements | Qualification - by accredited third party |
Personal Protective Equipment
|
|
Head - Hard Hat |
|
|
Eyes - Glasses |
|
|
Breathing - Mask or Respirator |
|
|
Hands - Gloves |
|
|
Feet - Industrial Footwear |
|
|
Visibility - Hi-viz Clothing |
|
|
Other PPE |
Training Material
|
|
Printed |
|
|
Video/DVD |
|
|
Web-based |
|
|
Other |
Fencing & Enclosures
|
|
Fencing |
|
|
Bunding |
|
|
Floor Reinforcing |
|
|
Covers or Shielding |
|
|
Other |
Approvals Related to Use of Output
Important Note on Composting in NSW
In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.
While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.
If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm
Installation Specifications
Installation Specifications
Utilities
|
|
Power | 415 Volts | 5.5 kWh |
|
|
Water | KPa | l/min |
|
|
Sewer | - l/min | |
|
|
Compressed Air | - KPa | - CuM/min |
|
|
Gas | - Kjoule/hr |
Dimensions
| Length | 200 cm |
| Width | 90 cm |
| Height | 244 cm |
| Footprint | 2 sq.m |
| Weight | 3000 kg |
| Lateral clearance | 120 cm |
| Overhead clearance | 0 cm |
Service Offering
|
|
Supply |
|
|
Installation |
|
|
Maintenance |
|
|
Product Uplift |
|
|
Training |
|
|
Other |
In-Feed & Out-Feed Characteristics
In-Feed Characteristics
Acceptable In-feed Characteristics
|
|
Loose |
|
|
Bundled |
|
|
Tied |
|
|
Wet |
|
|
Dry |
|
|
Shredded |
|
|
Lightly Soiled |
|
|
Heavily Soiled |
|
|
Other |
| If Other | 0 |
Exclusions
| Excluded Materials | Bulk hard material |
Out-Feed Characteristics
Out-feed Product Characteristics - Shape
|
|
Rectangular Prism |
|
|
Cylindrical |
|
|
Other |
Out-feed Product Characteristics - Container
|
|
Bag/Sack |
|
|
Wrapped |
|
|
Bin |
|
|
Other |
Out-feed Dimensions
| Length | 70 cm |
| Width | 75 cm |
| Height | 110 cm |
| Footprint | 1 sq.m |
| Weight | 350 kg |
| SG | 1 specific gravity |
| Density | 606 kg/Cu.m |
| By-product and Wastes | 0 |
Amenity and Nuisance Issues
|
|
Noise |
|
|
Odour |
|
|
Vibration |
|
|
Light |
|
|
Heat |
|
|
Other |
Market/Recipients
|
|
Reprocessor |
|
|
End Market |
|
|
Other |
OEM & Supplier Information
OEM & Supplier Information
OEM Company Details
| Company Name | Trethewey Industries Pty Ltd |
| Postal Address | 14 Carl Baer Circuit, Deepwater |
| State | NSW |
| Country | Australia |
| Postcode | 2370 |
| Web Site | www.autobaler.com.au |
| Contact Name | Tony Ryan |
| Contact Telephone | +61 (0)2 6734 5403 |
| Contact Email | sales@autobaler.com.au |
Supplier Company Details
| Company Name | Trethewey Industries Pty Ltd |
| Postal Address | 14 Carl Baer Circuit, Deepwater |
| State | NSW |
| Country | Australia |
| Postcode | 2370 |
| Web Site | www.autobaler.com.au |
| Contact Name | Tony Ryan |
| Contact Telephone | +61 (0)2 6734 5403 |
| Contact Email | sales@autobaler.com.au |
