A509 Cardboard & Plastic Baler - Mil-tek A509
Baling
, Compacting/Compressing
Equipment Overview& Equipment Details
Equipment Details
Make, Model & Classification
| Name | A509 Cardboard & Plastic Baler |
| Model | Mil-tek A509 |
| Classification | Baling , Compacting/Compressing |
Operations
| Description or Purpose | The A509 compacts a wide variety of recyclable waste and with the adjustable bale size it can adapt to different situations and materials. With a wide opening and spacious pressing chamber, the A509 is able to handle bulky materials and large volumes. With plastic bales up to 300kg – an automated bale out mechanism is a must, and the A509 has a two-handed system that lives up to the EN16500 safety standard |
| Operating Principles | Fast and powerful vertical baler with a small 1.5m2 footprint. The A509 combines speed and power for heavy duty efficiency when baling cardboard and plastic -225 kg cardboard bales & and 300 kg plastic bales -Dual, double-acting cylinders with ECODrive -Automated bale-out functionality -Baler optimized for large waste volumes -Adjustable bale size -Only 1.5m2 footprint |
| Additional Information | The heavy-duty machine is based on pneumatic technology, two cylinders powered by compressed air allow for a pressing force of 8000 kg and a super-fast pressing cycle of only 15-25 seconds. |
Photograph
Recyclables Processed & Productivity
Recyclables Processed
Target Recyclables and Productivity Rates
| Recyclable Type | Productivity - Loading Rate (kg per hour) |
Processing Capacity - Treatment (kg per week) |
Storage Capacity (kg per batch) |
Operating Life (machine hrs) |
|
|---|---|---|---|---|---|
|
Food Organics | ||||
|
|
Other Organics (garden etc.) | ||||
|
Flexible Plastic | 225-300 | |||
|
|
Rigid Plastic | ||||
|
|
Mixed Plastics | 225-300 | |||
|
|
Expanded Polystyrene | ||||
|
|
Glass | ||||
|
|
Paper | ||||
|
|
Cardboard | 225-300 | |||
|
|
Mixed Paper & Cardboard | 225-300 | |||
|
|
Timber | ||||
|
|
Other Recyclable | ||||
Productivity
Life Expectancy
| Operating Life - Years |
Level of Automation
| Operating Mode | Batch |
| Degree of Automation | Fully automated - materials placed into system and process automated |
Labour Requirements
| Number of Operators | |
| Operator Time (per cycle in mins.) |
Consumables Required
| Consumables |
Service Requirements
| Service Freq. (Tonnes) | |
| Service Freq. (Months) | |
| Downtime per Service (hours) |
Periodic Cleaning Requirements
| Periodic Cleaning |
Loading & Unloading Equipment
| Manual Handling Loading | Manual |
| Manual Handling Unloading | Manual |
Work Health and Safety & Permitting
Work Health and Safety
Training
| Operator Training Requirements | Qualification - by accredited third party |
Personal Protective Equipment
|
|
Head - Hard Hat |
|
|
Eyes - Glasses |
|
|
Breathing - Mask or Respirator |
|
|
Hands - Gloves |
|
|
Feet - Industrial Footwear |
|
|
Visibility - Hi-viz Clothing |
|
|
Other PPE |
Training Material
|
|
Printed |
|
|
Video/DVD |
|
|
Web-based |
|
|
Other |
Fencing & Enclosures
|
|
Fencing |
|
|
Bunding |
|
|
Floor Reinforcing |
|
|
Covers or Shielding |
|
|
Other |
Approvals Related to Use of Output
Important Note on Composting in NSW
In NSW, applying waste to land – including a processed waste such as compost - or using it as a fuel may trigger various regulatory requirements. Depending on the proposed use you may be required to comply with a Resource Recovery Exemption or need to hold an environment protection licence, and pay the waste levy.
While there is a Compost Exemption (2014) it is important to note that drying or dehydrating food waste, or any other compostable waste, is specifically excluded from consideration under this exemption. Drying or dehydrating equipment uses externally supplied energy to heat and ventilate food waste or any other compostable waste in order to rapidly dry the waste material over a short time period (typically 24 to 48 hours), either with or without the addition of an inoculum. If you are interested in this type of equipment you should refer to the resource recovery exemptions for information on lawful use of outputs.
If it is intended to use the material as a fuel, it must comply with the NSW Energy from Waste Policy Statement. http://www.epa.nsw.gov.au/waste/140056enfromwasteps.htm
Installation Specifications
Installation Specifications
Utilities
|
|
Power | Volts | |
|
|
Water | KPa | l/min |
|
|
Sewer | l/min | |
|
|
Compressed Air | KPa | CuM/min |
|
|
Gas | Kjoule/hr |
Dimensions
| Length | 0 cm |
| Width | 0 cm |
| Height | 0 cm |
| Footprint | 0 sq.m |
| Weight | 0 kg |
| Lateral clearance | 0 cm |
| Overhead clearance | 0 cm |
Service Offering
|
|
Supply |
|
|
Installation |
|
|
Maintenance |
|
|
Product Uplift |
|
|
Training |
|
|
Other |
In-Feed & Out-Feed Characteristics
In-Feed Characteristics
Acceptable In-feed Characteristics
|
|
Loose |
|
|
Bundled |
|
|
Tied |
|
|
Wet |
|
|
Dry |
|
|
Shredded |
|
|
Lightly Soiled |
|
|
Heavily Soiled |
|
|
Other |
Exclusions
| Excluded Materials |
Out-Feed Characteristics
Out-feed Product Characteristics - Shape
|
|
Rectangular Prism |
|
|
Cylindrical |
|
|
Other |
Out-feed Product Characteristics - Container
|
|
Bag/Sack |
|
|
Wrapped |
|
|
Bin |
|
|
Other |
Out-feed Dimensions
| Length | cm |
| Width | cm |
| Height | cm |
| Footprint | sq.m |
| Weight | kg |
| SG | specific gravity |
| Density | kg/Cu.m |
| By-product and Wastes |
Amenity and Nuisance Issues
|
|
Noise |
|
|
Odour |
|
|
Vibration |
|
|
Light |
|
|
Heat |
|
|
Other |
Market/Recipients
|
|
Reprocessor |
|
|
End Market |
|
|
Other |
OEM & Supplier Information
OEM & Supplier Information
OEM Company Details
| Company Name | Mil-tek Waste Solutions |
| Postal Address | 3 Tindal Rd, Tuggerah |
| State | NSW |
| Country | Australia |
| Postcode | 2259 |
| Web Site | www.miltek.com.au |
| Contact Name | Jason Campbell |
| Contact Telephone | 0476 508 500 |
| Contact Email | jason.campbell@miltek.com.au |
Supplier Company Details
| Company Name | Mil-tek Waste Solutions |
| Postal Address | 3 Tindal Rd, Tuggerah |
| State | NSW |
| Country | Australia |
| Postcode | 2259 |
| Web Site | www.miltek.com.au |
| Contact Name | Jason Campbell |
| Contact Telephone | 0476 508 500 |
| Contact Email | jason.campbell@miltek.com.au |
